Hex bolts, carriage bolts, T-bolts, eye bolts, U-bolts and fully threaded rods produced to DIN, ISO, ANSI and GB standards. Available in carbon steel, stainless steel and high-strength grades with zinc, black oxide, Dacromet and hot-dip galvanized finishes.
← Back to all product categories
Hex bolts, carriage bolts, T-bolts, eye bolts, U-bolts and fully threaded rods produced to DIN, ISO, ANSI and GB standards. Available in carbon steel, stainless steel and high-strength grades with zinc, black oxide, Dacromet and hot-dip galvanized finishes.
Our bolt and threaded-rod range is cold-formed and CNC-machined in-house, covering hex head, carriage, T, eye and U patterns plus fully threaded rod in metric and inch sizes. Carbon steel grades 4.8 to 12.9 and stainless A2/A4 are standard, with zinc, black oxide, Dacromet, hot-dip galvanized and PTFE (Teflon) coatings matched to the service environment.
Every order runs under our ISO 9001 quality system with incoming material verification, in-process gauges and a final dimensional check before packing. Packing follows your requirement — carton quantities, pallet layout, part-number labelling and export marking are all done as specified. Send us a drawing, a photo or a part number and you will receive a quotation within 24 hours.
Click any product photo to see its specification.
We manufacture to DIN, ISO, ANSI and GB standards and also produce strictly to your drawing. For bolts & threaded rods, the applicable standard and any deviations are confirmed in the quotation, and material and dimensional reports can be supplied with the shipment.
Yes. Send a drawing, a 3D model or a physical sample and our engineers will quote it, usually within 24 hours. Tooling is built in-house for cold-formed and CNC-machined parts, so prototype and volume production run on the same process.
Stock and standard items are usually shipped within 7–15 days of order confirmation. Made-to-drawing items depend on tooling: first articles typically take 25–40 days including tooling, and repeat orders are substantially faster. Minimum quantities are set by setup time and material minimums rather than by policy, and they drop on repeat orders.
Yes. Under ISO 9001 we provide material certificates, dimensional inspection reports and coating thickness reports on request, and we can agree inspection criteria with you before production starts.
If your required fastener isn't listed, send us a drawing, sample or 3D model — our engineers will quote it within 24 hours.
contact@nxhdmfg.com
+86 352 5330772
+86 180 3528 0246
